Ultra Quik Grip (LN-990)

This premium, high strength, fast-bonding adhesive offers a quick initial grab with no bracing required and a minimal need for mechanical fasteners. It's perfect for installing crown molding and other jobs that require a fast hold and an elegant look. It can also be considered a "green glue" because it contributes toward LEED and NAHB certification.

  
 
Ultra Quik Grip for installing crown molding and more

Key Features

Recommended For:

bonding common building materials (concrete, lumber, etc.) to paneling, drywall, chair rails, cork, furring strips, concrete, brick, ceramic tile, plywood, waferboard, lumber, glass, plaster, foamboard and baseboards. Ideal for installing crown molding.

NOT Recommended For:

mirrors, plastic, vinyl and metal.

Available Sizes

  • 10 fl. oz. cartridge
  • 7 fl. oz. tub

Coverage

  • Using a 1/4" (.64 cm) bead: 10 fl. oz. cartridge covers 30 lineal ft.
  • 7 fl. oz. tub covers 2 sq. ft.

Max VOC

53 GPL

 
Get Adobe Reader to view certain LIQUID NAILS Adhesive product info

You need Adobe Reader to view PDF files.
You can download it here for free if you don't have it.

 

Surface Preparation

Surfaces must be clean, dry and structurally sound. Cut and prefit materials prior to installation.

Product Application (Cartridge)

1. Insert tube into caulking gun. 2. Cut nozzle to desired bead size (marked on nozzle). 3. Apply adhesive in temperature of 40°F or higher and press your material into place. Material should not be applied to skinned adhesive. Do not apply to damp concrete or masonry. Note: One surface must be porous. Material to furring strips or studs: Apply zig-zag 1/4" adhesive bead to each strip or stud to be covered by material. Position material so edges meet at stud center. Press into place. Finishing nails required at top and bottom.

Product Application (Tub)

Using applicator provided in package, apply adhesive in temperature of 40°F or higher and press your material into place. Material should not be applied to skinned adhesive. Do not apply to damp concrete or masonry. Note: One surface must be porous.

Cleanup

Use water for wet adhesive. Scrape off dried adhesive. Use cloth dampened with mineral spirits to remove remaining residue.